The mold of foundation base is processed according to the customized pattern required by the drawing. The mold of foundation base belongs to the special-shaped steel mold, and the thickness of steel plate is usually more than 5mm, and this large-scale template needs other tools to support. The production of the base mould needs technical support. Small steel mould manufacturers do not have the ability to produce this mould. Introduction and description of steel mould for wind power foundation base are all produced and processed by steel. Why use steel material? On the one hand, because the steel material is very strong and durable, has good compression resistance, and can bear a large weight after being made into a mold. Moreover, the overall model of the base mold is the larger one. If the plastic material is used for processing, the mold will gradually deform in the long-term grouting and production process, and accompanied by The risk of slurry leakage at any time. In this case, the base base mould cannot be processed. In the past, this kind of formwork used to be simple wooden formwork, but the effect of concrete production is general, which is difficult to meet the current production requirements, so the production of this kind of formwork has gradually increased in recent two years.